Airsoft pistol hair trigger mod
This has work on every gun of similar design like this regardless
of brand.
This is a hair trigger mod for a Airsoft pistols. Should work
on other models if they use the same trigger system
Mod is fully adjustable with some grinding but I won't
be showing that here.
Just the basic mod needed to get all the slack out of
the trigger. Which does help when your trying to aim.
The safety does not work with this mod, without some
dremil work. But It can be made to work easily again.
I am just using a pair of tweezers for this mod. Cause
they were here and work.
Just note: never take both grip covers off at the same
time.
Parts will fly and the clip lock spring can go in both
ways.
Its not hard to figure out, but not fun.
First remove the right side grip. Be careful so trigger
spring doesn't fly.
But take a look how the trigger lever works. You can
see where the free play in the trigger system is.
I tried several ways to mod it on this side to shorten
it, but none were successful.
In this last pic you can see how the idea just hit me.
There is a pin just behind the trigger lever that could be use as a stop.
The pin doesn't even seem to do much but take up space.
Fits in there lose. I bet some crafty engineer was thinking ahead.
This side of the pin can be filed and replaced easily
to adjust the trigger pull. Also easily un-done if necessary.
So put the right side grip cover back on.
So now remove the left side grip cover. You can see the
other side of the pin now.
The trigger lock is the only tool you need for this mod. The pin near the thumb lock is the right size for the job.
Just use it to push the pin down, while you hold the trigger
all the way back.
Go in about that far, push to far or fast and you could
crack your grip on the other side.
So be careful cause it does move easy.
Could also drill a hole in each grip and be able to move
the pin at will with a push pin.
Ok now you have a hair trigger. So if you want the safety
to work, while in hair trigger mode.
You will need to enlarge the pocket for it on the trigger.
You can see the pin sticking through the right side.
This is my own personal paper target. Why limit yourself
to only 1 bulls eye?
[Also made to limit ink use.]
I am a point and shoot kind of guy. I don't use the sights
to aim.
So I will start with the target up close to check my
pointing aim then move it farther n father away till.
Though it is sort of a cheating target.
2in off in any direction is another bulls eye.
So kids like shooting at this one.